|
Below are specifications for a custom-built, performance long block 351C with 300 hp to 450 hp/350 ft lbs torque
- 351C ci block bored, honed, decked and align honed (4 bolt caps add 500.00)
- Performance camshaft:
- 214/224 @ .050
- .536 lift
- 112 lobe center
- or any other of your choice
- New performance cam bearings
- Match weight balanced rotating assembly with balancer
- Reground 3.50" stroke crankshaft
- Resized rods with ARP® rod bolts
- New performance bearings
- Performance pistons with Molly® rings
- 9.6 to 1 compression ratio
- New performance timing set
- New brass freeze plugs
- New performance high volume oil pump
- Cylinder heads ( modified for 4 barrel intake ) aluminum heads add 1050.00
- 2.119/1.710 stainless steel valves
- 130 lbs valve springs
- ARP head bolts
- 3 angle seats
- bronze guides
- positive seals
- bowl porting
- New push rods and stamped rockers (add 400.00 for roller rockers)
- New Fel-pro performance gasket set
- Painted Ford Blue or black
- Stage 2 Porting add $795.00(includes flow bench)
Price: $ 3350.00 As with all our remanufactured engines, this Ford 351C Mach 1 features new pistons, rings, complete gasket set, oil pump, and valvetrain installed. The block is bored and honed and new cam bearings and freeze plugs are installed. The heads are resurfaced, featuring new guides and seals, then refinished with a 3-angle valve job. Crankshafts are reground and micro polished to factory specs. Each motor is pretested for compression, oil pressure, and oil flow before leaving the factory. Our 12 month limited warranty covers parts for 12 months unlimited mileage.
|
